Back to top
  • Send SMS
  • Send Inquiry

Autoclaves

Product Image (MA10H (FA) / ADVANCE )

Fully Automatic Horizontal Sterilizer / Autoclave

Robust and rigid construction designed for all type of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical Institutions. Construction :- Triple walled with steam jacket and separate boiler . Inner chamber and steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding. The sterilizer has single piece S.S Door. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. Mounted on tubular steel frame with ground leveling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimize the heat losses due to radiation and is covered by polished Stainless steel sheet for that elegant appearance. Steam Generator :- Made of heavy Stainless Steel. Heavy ring mounted in front of the boiler with water gauge glass for water level indication Fitted with flange type S.S heating elements and low water level cutoff device to protect the former from burning out dry. Fitted with water inlet and outlet valves. Pressure Control :- The “PIEZOSTAT” (Pressure Control device) is incorporated in all electrically operated sterilizer. It economizes on power consumption and reduces the frequent opening of the steam release valve and thus prevents the release of steam in the room, it cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point. Heating Elements :- Flanged type, immersion heating elements are made of high grade material. ISI marked . Safety Door :- Sterilizer has hinged radial-locking door and cannot be opened when under pressure. The self-locking device automatically disengage the thread mechanism when the sterilizer under pressure to preclude any eventuality of accident. Single Point Control :- Complete sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front top. Two speeds of steam exhaust are available; fast and slow. Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized. Switch Box Houses the PIEZOSTAT, main switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation. Specification subject to change without notice

Product Image (MA- 10D)

Autoclave ( Vertical )

High pressure, electrically heated vertical steam sterilizer is used for sterilization of surgical instruments, dressing material, linen, rubber, plastic material by means of saturated steam under pressure of 15 psi. Apart from health services it is also used in scientific research institutions and universities. Sturdy double walled construction with boiler/inner chamber made of stainless steel of 18 SWG sheet. Outer shell is made of Stainless steel duly polished. The boiler and outer shell is provided with air insulation. Lid is made of Stainless steel plate and is tightened by radial locking system (chrome plated) with paddle lifting. Moulded, joint less gaskets are made of Neoprene rubber. Autoclaves are fitted with water level arrangements to indicate water position inside the boiler, pressure gauge, Air/steam release cock, spring loaded safety valve and Automatic Pressure switch which can be set at any selected point from 5 psi. to 20 psi ± 1 psi. and drain. ISI marked immersion type heating element heats the water and steam to desired temperature and pressure. Supplied complete with S.S. basket, cord and plug to work on 220 Volts, 50 cycles AC supply. Specification subject to change without notice

Product Image (MA- 10FA)

Fully Automatic Deluxe Autoclave ( Vertical )

High pressure, electrically heated vertical steam sterilizer is used for sterilization of surgical instruments, dressing material, linen, rubber, plastic material by means of saturated steam under pressure of 15 psi. Apart from health services it is also used in scientific research institutions and universities. Sturdy double walled construction with boiler/inner chamber made of stainless steel 304 sheet. Outer shell is made of Stainless steel duly polished. The boiler and outer shell is provided with air insulation. Lid is made of Stainless steel plate and is tightened by radial locking system (chrome plated) with paddle lifting. Moulded, joint less gaskets are made of Neoprene rubber. Fitted with Microprocessor based temp. Controller having 16 x 2 Character LCD display which enables automatic purging of cold air , sterilizing hold time and cycle end with automatic exhaust of pressure. All steps are user settable. The cycle is completed with without any human intervention. Autoclaves are fitted with water level arrangements to indicate water position inside the boiler, pressure gauge, Air/steam release cock, vacuum breaker , drain valve , solenoid valve spring loaded safety valve and Automatic Pressure switch which can be set at any selected point from 5 psi. to 20 psi ± 1 psi. and drain. ISI marked immersion type heating element heats the water and steam to desired temperature and pressure. Supplied complete with S.S. basket, cord and plug to work on 220 Volts, 50 cycles AC supply. specification subject to change without notice

Product Image (MA10H )

High Pressure Horizontal Sterilizer / Autoclave

Construction :- Triple walled with steam jacket and separate boiler . Inner chamber and steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding. The sterilizer has single piece S.S Door. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. Mounted on tubular steel frame with ground leveling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimize the heat losses due to radiation and is covered by polished Stainless steel sheet for that elegant appearance. Steam Generator :- Made of heavy Stainless Steel. Heavy ring mounted in front of the boiler with water gauge glass for water level indication Fitted with flange type S.S heating elements and low water level cutoff device to protect the former from burning out dry. Fitted with water inlet and outlet valves. Pressure Control :- The “PIEZOSTAT” (Pressure Control device) is incorporated in all electrically operated sterilizer. It economizes on power consumption and reduces the frequent opening of the steam release valve and thus prevents the release of steam in the room, it cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point. Heating Elements :- Flanged type, immersion heating elements are made of high grade material. ISI marked . Safety Door :- Sterilizer has hinged radial-locking door and cannot be opened when under pressure. The self-locking device automatically disengage the thread mechanism when the sterilizer under pressure to preclude any eventuality of accident. Single Point Control :- Complete sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front top. Two speeds of steam exhaust are available; fast and slow. Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized. Switch Box Houses the PIEZOSTAT, main switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation. Other Features :- • TRIPLE SAFETY :- The Sterilizer is provided with the triple safety features. At the boiler level by a PIEZOSTAT which automatically limits the pressure to the required set value and a spring loaded safety valve in case of its failure which releases the steam to keep pressure within the safety limits. At the chamber level, a spring loaded safety valve to release the steam in case the pressure exceeds the safety limit. All these safety features function independent of one another and sequentially i.e. one takes over the charge in case of other’s failure. • A plug screen prevents the discharge line from choking. The plug is easily removable for daily cleaning. • A dial thermometer is provided to show the chamber temperature. • Automatic Vacuum breaker is provided to break vacuum in case of formation of vacuum due to steam condensation. Operating Temp. & Pressure :- Sterilizing Temp : 120 ˚C Sterilizing Pressure : 1.2 to 1.5 kg/cm2 ( 15 psi to 22 psi) Power Requirement : Suitable to operate on 440V volts. 3 ph, 50 Hz, AC supply Specification subject to change without notice

Product Image (MA- 10T)

AUTOCLAVE ( TRIPPLE WALL ) VERTICAL

Tripple wall construction, all three wall inner jacket, outer are made of stainless steel 304. The lid is made of stainless steel sheet. The unit is fitted with radial locking system with paddle lifting device, made of MS chrome plated. Provided wit built in safety valve, pressure gauge, pressure release valve and water level indicator. The pressure is adjusted from 5 to 230 psi ± 2 psi with automatic pressure control switch. Supplied complete with Stainless Steel Basket, Cord and plug. Specification subject to change without notice

X


Products Description
METREX SCIENTIFIC INSTRUMENTS PVT. LTD.
WH-20, Mayapuri Industrial Area, Phase-1,New Delhi - 110064, India
Phone :+918045478202
Fax :91-11-28115271
Mr. Sharad Bhagat (Director)
Mobile :918045478202
Product Showcase
  • Send SMS
  • Send Inquiry