Back to top
  • Send SMS
  • Send Inquiry

Water Bath Incubator Shaker

Product Image (MMI- 100C)

Water Bath Incubator Shaker ( Refregerated )

Metrex low temp. water bath incubator shaker is of sturdy construction with outer body made of stainless steel and inner chamber made of stainless steel grade 304. Lid made of Stainless Steel grade 304 .The gap between the inner and outer chamber is filled with effective insulation. Temp. below ambient is achieve by hermatically sealed CFC FREE compressor (ISI Mark) placed below the water bath with other refrigeration accessories. For above ambient temp. Stainless steel immersion type heating elements are provided inside the bath. Temp. Controller by Microprocessor PID Digital Temp. Controller. TEMP. RANGE : 5º C to 100ºC ACCURACY : + 0.5º C or better A variable speed geared PMDC motor is fitted to provide shaking of the tray, the speed of the motor can be varied through a stepless electronic regulator fitted in the panel. The shaking tray moves on four wheels / balls. Shaking speed : 40 to 180 RPM, with Digital RPM Indicator. The bath is provided with a stainless steel pyramidical shaped lid and a drain plug. Shaking tray size : 405 x 300 x 150 mm (L x W x D) With Shaking Rack : 4no. X 250ml and 6no. X 100ml Suitable to operate on 220V, 50cy, single phase AC supply only. Specification subject to change without notice

Product Image (MMI-100)

Water Bath Incubator Shaker

Water bath incubator shaker is of sturdy construction with outer body made of mild steel sheet duly powder coated and inner chamber made of stainless steel grade 304. The gap between the inner and outer chamber is filled with effective insulation. Temp. is controlled by Thermostatic control. A variable speed motor is fitted to provide shaking of the tray, the speed of the motor can be varied through a stepless electronic regulator fitted in the panel. The shaking tray moves on four wheels / balls (Reciprocating), For above ambient temp. Stainless steel immersion type heating elements are provided inside the bath. The bath is provide with a stainless steel paramedical shaped lid and a drain plug. Supplied complete (without shaking rack.) Temp. Range : Ambient + 5ºC to 100ºC RPM = 30 –150 Shaking Type = Reciprocating Specification subject to change without notice

Product Image (MMO- 200C)

Water Bath Incubator Shaker ( Orbital )

Water bath incubator shaker is of sturdy construction with outer body made of stainless steel sheet duly powder coated and inner chamber made of stainless steel grade 304. The gap between the inner and outer chamber is filled with effective insulation. Temp. is controlled by PID Microprocessor Temp. Controller A variable speed motor is fitted to provide shaking of the tray, the speed of the motor can be varied through a stepless electronic regulator fitted in the panel. The shaking tray moves on triple eccentric drive to give ORBITAL Motion For above ambient temp. Stainless steel immersion type heating elements are provided inside the bath. The bath is provide with a stainless steel paramedical shaped lid and a drain plug. Supplied complete (without shaking rack.) Temp. Range : + 5ºC to 100ºC RPM = 30 –180 Shaking Type = ORBITAL Specification Subject to change without notice

X


Products Description
METREX SCIENTIFIC INSTRUMENTS PVT. LTD.
WH-20, Mayapuri Industrial Area, Phase-1,New Delhi - 110064, India
Phone :+918045478202
Fax :91-11-28115271
Mr. Sharad Bhagat (Director)
Mobile :918045478202
Product Showcase
  • Send SMS
  • Send Inquiry